Truck body extrusions and the EN 12642 load path
EN 12642 asks a Code XL side wall to hold 0.4 × P. This walks the load path from panel to chassis, and names the extrusion that decides…
Read article arrow_forward
11 articles
Technical guides on alloys, dies, tolerances, finishes and material selection.
EN 12642 asks a Code XL side wall to hold 0.4 × P. This walks the load path from panel to chassis, and names the extrusion that decides…
Read article arrow_forward
Two quotes for the same drawing rarely agree. Where the difference sits — billet basis, delivered wall, finish class, scope — and how to…
Read article arrow_forward
How extrusion tolerances are held in practice: GB/T 5237 high-precision class, grooves at plus or minus 0.1 mm, walls from 0.8 mm, and what…
Read article arrow_forward
Aluminum extrusions enter under three headings, and the one you declare decides whether anti-dumping duty applies. A working guide to…
Read article arrow_forward
Anodizing, powder coating, PVDF, electrophoresis, wood grain and mechanical finishes are specified by different standards, applied at…
Read article arrow_forward
Extrusion gives dense, weldable metal and tall fins; die casting gives complex bosses and near-net shape. A practical comparison of thermal…
Read article arrow_forward
The 7xxx family is the strongest extrudable aluminum, reaching roughly 572 MPa in 7075-T6. What 7050 and 7005 add, why 7xxx extrusion runs…
Read article arrow_forward
Wall thickness drift, die lines and streaking are signatures left by the extrusion die, not the alloy. How H13 die steel, nitriding…
Read article arrow_forward
6005A-T6 reaches near-6061 strength while extruding faster, costing less per meter and holding more strength after welding. The real…
Read article arrow_forward