Skip to main content
Linkedalu Metal Group Co., Ltd LINKEDALU Metal Group

Curtain Wall Aluminium Profiles

Short answer. We extrude curtain wall mullions, transoms, pressure plates, cover caps, corner sections and sill details in 6063-T5/T6, with walls from 1.2 mm to 6.0 mm and mill lengths of 6.0–7.0 m. Thermal-break assembly, CNC drilling and tapping run in the same plant in Foshan. Minimum order is 500 kg per profile, and profiles ship FOB Shenzhen or Guangzhou, cut to your list.

The choice that decides everything else is unitized or stick-built. Unitized moves assembly to the factory and puts the tolerance on the panel; stick-built keeps assembly on site and puts it on the mullion. Pick that first, then the mullion depth.

Unitized or Stick-Built

What you are buildingSystem to specifyWhat the section has to solveWhere we go deeper
Tower with a fixed panel module, factory glazingUnitizedPanel tolerance stack-up, interlock water path, crane and floor-loading sequenceHigh-rise curtain wall profiles
Low- to mid-rise, site glazing, irregular gridStick-builtMullion depth for wind load, transom fixing, site tolerance allowanceArchitectural curtain wall profiles
Renovation over an existing frameStick-built, shallowCover cap interface, fixing into an unknown substrateArchitectural curtain wall profiles
Narrow sightline with a visible mullionUnitized, split mullionSightline width against drainage chamber depthHigh-rise curtain wall profiles

Mullion Depth and Wind Load

Mullion depth is set by wind load and span, not by the glass. A deeper mullion raises the section modulus and the moment of inertia together, which is why two facades with the same glass can need different sections. Wall thickness then follows the depth: a 1.2 mm wall is common on low-rise stick-built work, and 3.0 mm and above appears on exposed towers where the section is also handling thermal movement.

Questions Before Ordering

Which alloy is used for curtain wall profiles? 6063-T5 and 6063-T6 for most mullions and transoms, 6061 where a higher-strength section is needed. All three are extruded in Foshan.

What wall thickness do curtain wall mullions need? Most specifications land between 1.2 mm and 6.0 mm, set by wind load and mullion depth rather than a fixed rule. Our plant extrudes from 0.8 mm up.

What is the largest profile you can supply? Up to a 540 mm circumscribed circle on a 5,000 MT press, with mill lengths of 6.0–7.0 m. A 40 ft container takes 6.0 m profiles in two cuts.

Can you supply thermal-break curtain wall profiles? Yes. Profiles are extruded, then cut and assembled with polyamide strips in the same plant, with CNC drilling and tapping after assembly.

What is the minimum order? 500 kg per profile, whether the die is new or already in our rack. A new die takes 15–25 working days after drawing approval, plus 3–5 days for sampling.

Related Reading

What tolerances an extruded profile can hold · High-rise curtain wall profiles

Buying this profile

  • check_circleCustom dies built to your drawing or sample
  • check_circleMill, anodized, powder coated or PVDF finish
  • check_circleCut to length, CNC machined or fully assembled
  • check_circleMill test reports and coating thickness records
request_quote Get a quote for this range