Most enquiries from Riyadh don't arrive as a drawing. They arrive as a photo of a facade and one line: can you make this.
So we quote aluminium louver systems as one package, not as loose profiles. Blades, mullions, drive channels, pressure plates and end caps come off the same drawing set, in 6063-T5 or 6063-T6, with walls from 1.2 mm to 6.0 mm and 6.0 m bars cut to your call-up list. A new blade die takes 10 to 20 working days, trial and sample included. Production runs 15 to 25 days after you approve that sample. Minimum order is 500 kg per profile.
Why Do Riyadh Enquiries Start With a Photo?
Gulf buyers usually send a photo, a span and a deadline, because the architect has not fixed the blade section yet. That is fine. From a photo we can tell you blade width, spacing and whether the frame you have in mind can carry it. What we cannot do is guess the wind load. That comes from your engineer, and it decides the mullion spacing, not the die.
If you already have a section drawing in DXF or PDF, we skip that step and quote the die directly.
Which Finish Survives Gulf Sun and Sand?
Three finishes, three different jobs. Pick by what the facade has to do, not by what looks best on a sample board.
| Finish | Good for | Where it falls short |
| Polyester powder coating | Full RAL range and colour matching across a project | Deep scratches show, and gloss finishes show dust faster than matte ones |
| Anodising | Metallic look, harder surface, coastal air | Narrow colour range, and dark anodised blades get hot in direct sun |
| Wood-grain transfer | Wood look on aluminium, common on villas and mashrabiya-style screens | Not a wood replacement, and the grain repeats along a long run |
We finish in house, so a colour change on a repeat order does not mean a new supplier and a new learning curve.
Fixed, Operable or Motorised?
Fixed blades are the cheapest and the least trouble: no linkage, no maintenance. Operable systems need a drive channel with a slot that keeps the linkage running without binding, and that slot is where tolerance matters most. Motorised systems need a pocket for the actuator and a bracket for the motor. We extrude and machine the channels and brackets. We do not supply the motors.
If the owner has not decided, tell us the orientation and how often the blades are expected to move. Daily operation changes the hardware, not the blade.
Blade Shapes We Extrude
Four shapes cover most projects. Z-blade is the simplest die and the cheapest blade, the workhorse for car parks and plant rooms. Airfoil gives better airflow and a cleaner line from below, with more die work. C-blade is a deep section for wide spacing and privacy screens. Custom means your section, including hollow chambers for stiffness.
Width is limited by the press, not by the shape. The circumscribed circle tops out at 540 mm on our largest press, so anything wider needs a different production route. We will say so before you spend money on a die.
Alloys, Walls and Standards
| Item | Range |
| Alloy and temper | 6063-T5, 6063-T6, 6005A-T6. 6061 and 6082 quoted on request |
| Wall thickness | 1.2 mm to 6.0 mm |
| Length | 6.0 m standard, cut to project length |
| Tolerance | GB/T 5237 high-precision grade |
| Fabrication | CNC drilling and milling, punching, notching, cut to length |
| Standards | GB/T 5237, EN 755-9, ASTM B221 |
| Press capacity | 26 presses, 500 MT to 5,000 MT |
| Plant | Foshan, 100,000 t per year, since 2005 |
| MOQ | 500 kg per profile, whether or not a new die is needed |
Packing for Dammam and Jebel Ali
Blades are the easy part to damage. We pack in installation sequence, not production sequence. Each bundle carries a label that matches your installer's call-up list, and the label ties back to the billet batch and the coating run. Mill test certificates travel with the shipment. 6.0 m bars ship in 40 ft containers, and a project cut to 3 m or under can share a 20 ft with other profiles.
If the site has no covered storage, say so at order stage. We can wrap blades individually and add corner protection, which costs less than replacing a bundle that arrived with rubbed edges.
How a Project Order Runs
- You send a photo, a section drawing, or both, plus span, orientation and finish.
- We come back with the blade and mullion set, the die, and what we need from you to price the package.
- Die and sample: 10 to 20 working days, trial and sampling included.
- You approve the sample in writing, we run production: 15 to 25 days after approval.
- Labelling, packing, documents, and shipping from Shenzhen or Guangzhou.
What We Do Not Do
- We do not supply motors, actuators or control panels.
- We do not do wind-load or structural engineering. Your engineer signs the mullion spacing.
- We do not install on site.
- We do not sell below 500 kg per profile, and we will not pretend a 200 kg trial is coming.
If your blade section already has a supplier, we can quote the mullions and drive channels alone. That happens more often than you would think.
Where This Fits
For fixed systems, see our fixed louver and sunshade extrusion profiles. For facade work with operable blades, see operable louver facade profiles. Both pages cover the profile side. This page covers the project side: climate, packing, documents and timing.
Two other pages worth reading before you specify: our extrusion tolerances guide explains what high-precision grade actually buys you, and the surface finishes guide covers powder, anodising and wood-grain in more detail.
Reviewed 2026-11-16 · Linkedalu Metal Group Co., Ltd, Foshan, China